Tuesday 24 September 2013

Feethams - Latest Update



Paul's latest  2 weekly update for the Feethams Developments;-

·         With the completion of the cricket season the final stages of the football stand (Tin Shed) demolition  can commencing this week and should be complete by the end of the week.

·         The importation of the recycled granular materials to raise & level of the existing ground is still ongoing which we hope to have complete by the middle of next week.

·         The old concrete & timber benches along the north & east side of the pitch have now been removed and work on the new access road  has started, with the area being excavated ready for the new road construction.

·         The existing concrete coping pillars on top of the turnstile entrance are to removed later this week in preparation for the demolishing work commencing next week. These are to be retained and if in a suitable condition they are to be reused on the new walls that are to be installed at the site entrance.

                The next 2 week the following works are scheduled to start:-

·         The turnstile & scored board demolition.

·         Construction of the new access road will continue.

·         Once all the recycled granular material has been imported to site. The existing concrete posts and rail around the east side of the cricket pitch are to be removed to allow for the installation of a new timber fencing & ball stop mesh.

Please note the footpath in front of the existing turnstiles entrance gates (see attached sketch) will be closed from  the beginning of this week as works at the site entrance start to commence (copping pillar removal) and is to remain in place during  the turnstile demolition, installation of foundations & new access walls, drainage and the new access road entrance.

Regards

Paul Nicholson
Senior Site Engineer
Lumsden & Carroll Civil Engineering
Esh House, Bowburn North Industrial Estate, Bowburn, Durham, DH6 5PF
T: (0191) 3774500 M: 07971 981268 F: (0191) 3774501


No comments:

Post a Comment